Chain Tension

A TS250/0 needs a chain adjustment. How does one determine correct slack with chain bellows installed?
M.

http://www.miraculis.de/aw/mz/mz.html?h ... /rep4.html

Dateianhänge

Look at the Picture and press with your thumb the chain 1-2 centimeter down with normal force.in the middle of the chain

http _www.miraculis.de_aw_mz_text_ts251r_131.gif (211.12 KiB) 10061-mal betrachtet

If in doubt, a bit too much slack is better than too little, as that will damage the bearing in the gearbox.