Mz es 250/2 Garage

For non German-speakers. We will try to discuss in your language here, preferably in English. Guest posts welcome.

Moderator: Moderatoren

Mz es 250/2 Garage

Beitragvon mario1300 » 9. November 2013 08:07

Hi guys!

I come from Croatia,and I have some questions about different cylinders that look almoust the same(ES/ETS/TS),are they compatible together with ES 250/2 3=10 head or 1=10 head?

This is the 05-42-062 ES 250/2 cylinder s16 from 1971.g:
Bild

The 05-42-062 made in 1976,Is this the TS cylinder?Can it be fitted to ES 250/2 engine and ES 250/2 cylinderhead?
Bild

The red arrow marks the˝ring˝ that the 05-42-062 ES 250/2 cylinder s16 from 1971. doesn´t have...this cylinder was bought at ebay.de titled as an ES TS ETS 250 cylinder...
This 76 cylinder fits the TS 250 cylinderhead really nice,the diamater of the ˝ring˝on the cylinder and the circular pit on the 250 ts cylinder head are the same:
Bild
Bild

If this ˝ring˝ was precisely removed ,could then this 76 cylinder be compatible with ES 250/2 3=10 or 1=10 cylinder Heads??


Few Questions about cylinderheads...

Bild

The area marked with red is lower than the area marked with blue colors...why?For cooling maybe?
On the cylinder head of 250 TS the surface is all straight...

Thanks for answer
Zuletzt geändert von mario1300 am 26. Dezember 2015 15:06, insgesamt 1-mal geändert.

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon Überströmer » 9. November 2013 09:16

Dear Goldilox,

yes you´re right the cylinders and also the cylinder heads of TS and ES for 250ccm are quit different in regard to there common sealing area. The parts of ETS are the same used in the ES.
The reason for is that at TS a sealing made from metal is used which is fixed on the right position with this ring you´ve measured with your caliper.
The sealing at ES and ETS is only assured by direct contact of this two units. To reach this and to avoid decreasing pressure the coloured areas at the ES cylinder head are required so that the contact only will be done at the inner blue circle. At TS this is given by the used sealing so the cylinder head can be straight.

For information also the cylinder with the cylinder head of the TS can be used on the ES engine.

Good luck and best regards.

Fuhrpark: RT 125/3
ES 150/1
ES 125/G-5 (im Aufbau)
ES 250
ES 250/2 mit PSW
TS 150
TS 125
ETZ 250
ETS 250
IFA BK 350
ETZ 150 (2x)
Baghira SM
Überströmer

 
Beiträge: 309
Themen: 20
Registriert: 26. Juli 2008 20:38
Wohnort: Sosa / Chemnitz
Alter: 39

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 9. November 2013 19:23

Thanks for answering...so it means that the piston rods on ES,ETS and TS are the same??
If piston rods are the same then this 76 cylinder with the ring,needs to be shorter(comparing it with 71 ES 250/2 cylinder without the ring) at some section for the dimension of the ring(about 1.5 mm)... :?

Some of my questions are still not answered :cry: ... :twisted:

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon ertz » 9. November 2013 20:05

Hi,
here some Informations about Cylinder -Heads for ES 250/2 and 175.
download/file.php?id=23699&kb=1

Here the different Cylinders from TS, ES.
viewtopic.php?f=4&t=60683

The diffrence from 17 Horsepower to 19 Horsepower - Cylinders:
on Page 2 : viewtopic.php?f=4&t=29703&hilit=Zylinder+19ps+17ps

Bye
ertz.
BildMitglied Nr. 066 im Rundlampenschweinchenliebhaberclub

Lothars Fibel für Vergasereinstellung: http://pic.mz-forum.com/lothar/SONSTIGE ... ungBVF.htm

ES 250 Kickstarterantrieb auf jeden Fall auf TS oder ETZ wechseln !
siehe: viewtopic.php?f=4&t=30624&p=1158985&hilit=kickstarterwelle+ertz#p1128457

Fuhrpark: momentan 7 Stück und nur 1 Arsch
ertz

Benutzeravatar
 
Beiträge: 1307
Themen: 20
Bilder: 32
Registriert: 12. Juli 2009 19:32
Wohnort: Borstendorf/Erzgeb.
Alter: 55

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon Christof » 9. November 2013 21:42

The Cylinder of the ES 250/2 with 19HP has to be fitted with a cylinderhead wich is marked with "MM250/2 e=10:1" underneath the lowest ridge. The Cylinder with the centerring has to be fitted with the cylinderhead which is marked with "MM 250/3 e=10:1". Both cylindera uses an equal rod and piston.
Grüße

Christof

Organisator des ES-Schweinetreffens in Coppanz 2013 & in Bucha 2015

Rundlampenschweinchenliebhaber Nummer 082

Kämpfer für das Überleben des 175er Ersatzmotors 4539110

Fuhrpark: TS 250/1 Luxus; mit Flachlenker Bj 1980,
TS 250 Standard; mit Flachlenker Bj 1974;
TS 150 Luxus; mit Hochlenker Bj. 1983,
ES 175/2 Standard; Bj. 1970,
ES 125/1; Bj. 1975
Christof
Moderator

Benutzeravatar
 
Beiträge: 9629
Artikel: 1
Themen: 69
Bilder: 26
Registriert: 11. Mai 2007 20:20
Wohnort: Bucha bei Jena
Alter: 41

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 10. November 2013 00:03

Thanks for answers guys.

dont have the cylinder head beside me now,but...this cylinderhead should fit the 71.cylinder 05-42-062 without the center ring(?):
Bild

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon Christof » 10. November 2013 13:17

Yes, the shown cylinderhead has to be fitted with a cylinder without centerring.
Grüße

Christof

Organisator des ES-Schweinetreffens in Coppanz 2013 & in Bucha 2015

Rundlampenschweinchenliebhaber Nummer 082

Kämpfer für das Überleben des 175er Ersatzmotors 4539110

Fuhrpark: TS 250/1 Luxus; mit Flachlenker Bj 1980,
TS 250 Standard; mit Flachlenker Bj 1974;
TS 150 Luxus; mit Hochlenker Bj. 1983,
ES 175/2 Standard; Bj. 1970,
ES 125/1; Bj. 1975
Christof
Moderator

Benutzeravatar
 
Beiträge: 9629
Artikel: 1
Themen: 69
Bilder: 26
Registriert: 11. Mai 2007 20:20
Wohnort: Bucha bei Jena
Alter: 41

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 12. November 2013 23:08

OK,just a few questions :P

The area marked with red is lower than the area marked with blue colors...WHY?
For cooling maybe?

Bild

The same pattern on some older Mz cylinderheads:
Bild

Bild

Bild

Has anyone sucessfully modified TS Cylinder with ring(like mine from 76) and installed it with original ES cylinderhead on ES 250/2 Engine??(The links you gave me are great but my translator /bing/google doesnt always translate in a meaningfull way...)
What about height/location of intake and exhaust channel on this 2 different cylinders(71 and 76)?Does it vary?
If I removed the ring precicly and installed a spacer with the same thickness as ring...?

Thanks for answering...

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 8. Dezember 2013 23:57

Thank you guys for answering.This problem is solved,the engine is almoust finished.

Another question is related to aft Hinterradschwinge/rear swing arm and its Lagerbolzen/bearing bolt...How to remove it when it doesnt wanna go out???All the years without lubrication and bad care of motocycle from previous owners...


Heating or use force?

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon altf4 » 9. Dezember 2013 01:32

hi -

i'm just about to do the same -
and asked a friend who's a mechanic as he's got a 5 tonne press. can't be asked trying my luck with a hammer and a chisel ;)
these f*ckers sit in there solidly.
the bushes available, at least in my case, come oversized and need to be worked to the correct measure with a reamer.

best, max ~:)

p.s.: got mine from here:
haase
(under fahrgestell/blechteile etc...
82055 Lagerbuchse für Schwingenbolzen
-------------------------
http://www.alteisentreiber.de
-------------------------

Fuhrpark: es 250/2 1972 | ts 250/1 (die jawaemme), 1978 | es-t 250/2 , 1970 (sNufkiN) | es250/2 (das zwischending) | 2 x sr 500, ca. 1980
altf4

Benutzeravatar
 
Beiträge: 2334
Themen: 21
Registriert: 13. Juni 2007 23:59
Wohnort: devon gb
Alter: 57

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 24. November 2014 20:46

Bild

Still few tweaks to adjust,but this is current state of my MZ

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon altf4 » 24. November 2014 21:29

...very kewl! nice one!1!!

g max ~:)
-------------------------
http://www.alteisentreiber.de
-------------------------

Fuhrpark: es 250/2 1972 | ts 250/1 (die jawaemme), 1978 | es-t 250/2 , 1970 (sNufkiN) | es250/2 (das zwischending) | 2 x sr 500, ca. 1980
altf4

Benutzeravatar
 
Beiträge: 2334
Themen: 21
Registriert: 13. Juni 2007 23:59
Wohnort: devon gb
Alter: 57

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 20. März 2015 20:48

Bild


Waiting for some parts :twisted:

The red seat cover is gonna be installed+ baggage carrier/porter and small black and white suitcase :mrgreen:

BIG THANKS to Mr_T and Spitz :bia: :bia:

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 22. März 2015 23:14

Since this is a topic about differences between/in mz cylinders...and it is in English

Are TS 250/1(5 speed) and ts 250 4 speed(or ets,es 250) cylinders interchagable??



Thank for answer :twisted:

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon Spitz » 23. März 2015 12:26

:oops: :oops: :oops:

8)
Zuletzt geändert von Spitz am 22. April 2015 20:16, insgesamt 1-mal geändert.

Fuhrpark: Mz Es 175/1
BMW - Eintopf
Bungartz FRNK 7Ps-Diesel

Generation Rechenschieber :-)

www.reise-laster.de
Spitz

Benutzeravatar
 
Beiträge: 2338
Themen: 162
Bilder: 14
Registriert: 18. Dezember 2011 13:25
Wohnort: Stadt der Spitze, Bezirk K.-M.-Stadt
Alter: 55

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 20. April 2015 11:06

65 kilometres trip on a rainy day :twisted: :mrgreen:

Bild

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon kutt » 20. April 2015 11:08

... with the car :D
Anleitung: Getriebe BK350 - Kardan BK350 - Falke Beiwagen - Ein Bericht
Segel: Blog: Segeln Steemit: Steemit
Windows: ReBoot - Linux: BeRoot!
Wichtige Links: Forumregeln, Netiquette, Knowledge Base, Galerie, Karte, Forumkeller

Fuhrpark: BK350 (10/1956) - ES250 (06/1961) - ETS250 (??/197?) - TS150 (irgendwann/1984) - Skoda Octativa Kombi 1.9Tdi 81kW @ 500Tkm (09/2001) - Pfährt: Moto Guzzi V35 II (11/81) Umbau auf 650ccm und 50PS - Silverstar Classic (03/1994)
kutt
Technischer Admin

Benutzeravatar
------ Titel -------
AmForumSchrauber
Mr. Kardan
 
Beiträge: 18326
Artikel: 31
Themen: 592
Bilder: 831
Registriert: 9. März 2006 21:15
Wohnort: Freiberg
Alter: 44

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 19. Mai 2015 10:53

With red seat installed :D

Bild

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 16. Juli 2015 22:32

My precious :twisted: :mrgreen:

Bild
Bild

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon mario1300 » 22. September 2015 15:12

Yay or nay(looking good or not) :twisted: ?

Bild
Bild

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Cylinder/ cylinderhead help

Beitragvon Hubert » 22. September 2015 18:39

Looking good. Hubert

Fuhrpark: ES 250/2 A Gespann, BJ. 69, Yamaha SR 500 Bj 83 Solo, und SR 500 Gespann mit Velorex 562, XT 500 Bj 82, VW Bus Bj 66.
Hubert

 
Beiträge: 531
Themen: 26
Registriert: 14. Januar 2010 20:11
Wohnort: Dortmund
Alter: 62

Re: Mz es 250/2 Garage

Beitragvon mario1300 » 26. Dezember 2015 15:09

Little bit of warm up:
https://www.youtube.com/watch?v=EjOEnQB ... e=youtu.be

Still have to install few things;new H4 lamp and few crome items(Thanks Guessi) and new Trophy stickers/decals(Thanks Stefan) :mrgreen:

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Garage

Beitragvon mario1300 » 27. Januar 2016 23:09

All the parts listed in last message/post installed
+digital tacho/rpm and hour counter...functionality over looks ;)
Bild

Bild

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Garage

Beitragvon mario1300 » 30. April 2016 22:17

Bild

Fuhrpark: MZ ES 250/2
mario1300

 
Beiträge: 55
Themen: 6
Registriert: 26. Oktober 2013 18:51
Wohnort: Croatia
Alter: 36

Re: Mz es 250/2 Garage

Beitragvon 990sm-r » 11. Mai 2016 01:42

ich Fahre eine ES/ 250

Fuhrpark: ES 250-2, 340ccm, Originaloptik
Stage1: 29,6PS 4976U/min, 42Nm 4869U/min,
Stage2: 35,1PS 5685U/min, 44,7Nm 5397U/min
990sm-r

 
Beiträge: 1741
Themen: 12
Bilder: 0
Registriert: 22. April 2012 12:23
Wohnort: Prenzlau
Alter: 46


Zurück zu Questions and Answers



Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste