mediocre charge rate...Resolved

For non German-speakers. We will try to discuss in your language here, preferably in English. Guest posts welcome.

Moderator: Moderatoren

mediocre charge rate...Resolved

Beitragvon MichaelTorre » 6. April 2015 04:27

Hello again,
I am hoping to be able to adjust the voltage regulator on 1974 ts250 - 0.

Charges at a rate of 6. 1 volt at 2500 rpm, was wishing to raise that to 6.3 volts.

My genuine MZ manual doesn't detail about a judgment. It lists the gaps but it doesn't tell which gaps correspond to the measurements given.

no word for manual adjustment, just a phrase take to a specialist. so

Here I am, I have gone to the specialists.
Thank you.
Michael
Zuletzt geändert von MichaelTorre am 23. Mai 2015 05:07, insgesamt 1-mal geändert.

Fuhrpark: MZTS250/0,
Yamaha Standard 1100
MichaelTorre

Benutzeravatar
 
Beiträge: 68
Themen: 14
Bilder: 14
Registriert: 19. März 2015 18:06
Wohnort: Virginia, The Old Dominion
Alter: 68

Re: mediocre charge rate

Beitragvon luckyluke2 » 6. April 2015 05:29

Hello Michael , you can download the Electricmanual from Lothar , he is one from our Electrikspecialists . It is an PDF ; may be you can translate this . Look to page 22-24 . ;D

MZ Electric
Zuletzt geändert von luckyluke2 am 6. April 2015 08:23, insgesamt 1-mal geändert.
MfG , Steffen

Man wird alt und grau und 100 Jahre und lernt jeden Tag noch dazu !
"Hier bin ich Mensch , hier darf ich´s sein!"
ES 250 mit "Stützrad" ? ...find ich gut ! Bild
Retter des 175er Motors 4034402 !
Gründungsmitglied des GKV - Granseer Krawattenträgerverein
Mitglied Nr. 004 im Rundlampenschweinchenliebhaberclub
Bild
Bild

Fuhrpark: MZ ES 175 Bj. 1961 (im Keller , zerlegt), mein kleiner Bastard in unoriginal
MZ ES 250 Bj. 1961 mit "Stützrad"anbau , meine "Zicke" , seit 6.10.14 nach über 30 Jahren wieder offiziell auf der Straße
MIFA Klapprad ca. 1980 , etwas modernisiert (nicht mehr seit Sonntag , 15.09.2013 , geklaut !)
MIFA Klapprad vor 1980 , etwas "naked", Neuzugang vom 27.09.2013 als Ersatz , am 23.11. 2013 vom Bus überfahren
MIFA Klapprad vor 1980 , komplett mit einigen neuen Teilen , Neuzugang vom 30.11.2013 als Ersatz
luckyluke2
† 05.11.2015

Benutzeravatar
------ Titel -------
Heiligenstadt 2015 Helfer
 
Beiträge: 8162
Themen: 57
Bilder: 230
Registriert: 16. November 2012 18:33
Wohnort: Oberthulba
Alter: 57
Skype: Steffen Lucke

Re: mediocre charge rate

Beitragvon lothar » 6. April 2015 08:02

Maybe it´s easier to look at this figure:
E-M-PIC_0071.JPG


Move the aluminium tongue (blue point) to change the voltage. But be careful this aluminium tongue breaks easily.
In your case it is more recommended to insert a narrow paper sheet like red arrow shows. Doing so the voltage will increase.
Watch the effect by your DVM and insert as many sheets until the voltage will have been climbed up on the desired value.
Be patient the voltage jumps often too high or too low.

But note: There are a few other reasons for loo low voltage at battery terms. Check all cable connectors between regulator,
ignition switch in the lamp, fuses and battery. Often the main switch or the fuses are responsible for a non-acceptable voltage drop.

Also note that the nominal voltage at battery terminals is 6,8V ... 7,0V at about 3000min-1 and full light (6,3V is too less).

Regards
Lothar
MZ-Elektrik * Rahmennummernsammlung ES125/150 * Albanien 2023
Wie nennt man eigentlich Verschwörungstheoretiker, deren Theorie sich nach angemessener Zeit als richtig herausstellt?

Fuhrpark: ETZ150/88, ES150-1/70, ES150/65, RT125-0/52, MZ500R/92, ES175-2/72 Standpark: ES125/63, ES150/63
lothar
Moderator

Benutzeravatar
 
Beiträge: 8124
Themen: 251
Bilder: 5
Registriert: 27. Februar 2006 06:04
Wohnort: Dresden
Alter: 75

Re: mediocre charge rate

Beitragvon ea2873 » 6. April 2015 09:07

unless you are not keen of using the original regulator use the Vape electronic regulator.

as Lothar said, bevore changing the regulator, start cleaning/check the cable shoes and the fuse panel, normally you will be loosing some 1/10V there.

Fuhrpark: son paar MZ
ea2873

 
Beiträge: 7638
Themen: 36
Bilder: 83
Registriert: 17. Januar 2009 09:53
Wohnort: Regensburg

Re: mediocre charge rate

Beitragvon MichaelTorre » 6. April 2015 17:23

checking the connections is relatively easy.
I use a voltmeter digital and look for a voltage drop when straddling a connection.
Quick and easy.
.....so
the accumulated thickness of the paper is to indicate the amount I need to bend the aluminum tab?
it appears to be delicate. That's okay I have a light touch.

*****************************edit 5/9/15; charging at a nice fat 7.1 volts at 2500 rpm now.
Thank you. ****************************************************************
Michael
Zuletzt geändert von MichaelTorre am 23. Mai 2015 05:09, insgesamt 2-mal geändert.

Fuhrpark: MZTS250/0,
Yamaha Standard 1100
MichaelTorre

Benutzeravatar
 
Beiträge: 68
Themen: 14
Bilder: 14
Registriert: 19. März 2015 18:06
Wohnort: Virginia, The Old Dominion
Alter: 68

Re: mediocre charge rate

Beitragvon lothar » 6. April 2015 19:14

MichaelTorre hat geschrieben:the accumulated thickness of the paper is to indicate the amount I need to bend the aluminum tab?

Correct. But you can also leave the paper there if the voltage is OK. It saves the aluminium tongue for unnessecary bending.
MZ-Elektrik * Rahmennummernsammlung ES125/150 * Albanien 2023
Wie nennt man eigentlich Verschwörungstheoretiker, deren Theorie sich nach angemessener Zeit als richtig herausstellt?

Fuhrpark: ETZ150/88, ES150-1/70, ES150/65, RT125-0/52, MZ500R/92, ES175-2/72 Standpark: ES125/63, ES150/63
lothar
Moderator

Benutzeravatar
 
Beiträge: 8124
Themen: 251
Bilder: 5
Registriert: 27. Februar 2006 06:04
Wohnort: Dresden
Alter: 75

Re: mediocre charge rate

Beitragvon MichaelTorre » 6. April 2015 19:50

That's great!
Thank you for a "non-invasive" fix.

Regards
Michael
Zuletzt geändert von MichaelTorre am 23. Mai 2015 05:12, insgesamt 3-mal geändert.

Fuhrpark: MZTS250/0,
Yamaha Standard 1100
MichaelTorre

Benutzeravatar
 
Beiträge: 68
Themen: 14
Bilder: 14
Registriert: 19. März 2015 18:06
Wohnort: Virginia, The Old Dominion
Alter: 68

Re: mediocre charge rate

Beitragvon smokiebrandy » 6. April 2015 21:00

If you come to Germany... you have to dial .....
Teilnehmer der Wolfsschanzentour 2012, 2013 , 2014 , 2015 , 2017 ,2018
Besucher am Schlagbaum der EU Aussengrenze 2013 / erkennungsdienstlich behandelt , 2017 eingebucht im Netz RU
Mitglied Nr. 081 im Rundlampenschweinchenliebhaberclub
Ecklampenschweinsympathisant
Sandbüschel-Lichtausknipser 2014/2016

Gründungs-Mitglied im GKV - Granseer Krawattenträgerverein

OT-Partisanen-Zitteraal
Der Vollstrecker
___________________
Bild



Gruß aus dem Ostbüro der OT-Partisanen in Zittau , Renè

Fuhrpark: ETZ 150 Bj.1990 rot !, Abgang 15.08.2012
ETZ 250 Bj.1982 rot !,
MUZ Skorpion 660 Bj. 96 rot!, Abgang 31.10.2018
MZ ES 250/2 Gespann Bj.69 rot !

........................................
Opel Astra G 2.2 nicht rot sondern blau!
ETZ 251 im Aufbau... grün
smokiebrandy

Benutzeravatar
 
Beiträge: 8463
Themen: 40
Bilder: 39
Registriert: 23. Juli 2008 16:55
Wohnort: Zittau
Alter: 56


Zurück zu Questions and Answers



Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast