MZ es175/1 shock absorber oil

[mexec]

MZ es175/1 shock absorber for which oil to use necessary or which number oil ? castrol -- shell- mobil ???

( 80 cm3 Stoßdämpferöl 'Globo' je Federbein, Viskosität 1,65 ... 1,92°E bei 50°C = 8 ... 11 cSt/50°C
Im Ausland nur Marken-Dämpfungsflüssigkeit mit gleicher Viskosität verwenden! )
thanks.

[alexander]

Ich uebersetzte das mal (sinngemaess):

Fuer ne es 175/ 1 ist gefragt nach dem richtigen/ benoetigten Stossdaempferoel. .... .

[mexec]

80 cm3 Stoßdämpferöl 'Globo' je Federbein, Viskosität 1,65 ... 1,92°E bei 50°C = 8 ... 11 cSt/50°C

this in feature another which type alternative oil useable ? shell or castrol or mobil ......???

[Ex User Hermann]

this in feature another which type alternative oil useable ? shell or castrol or mobil ......???

SAE 10 - SAE 15 "Fork-Oil"

[alexander]

this in feature another which type alternative oil useable ? shell or castrol or mobil ......???

SAE 10 - SAE 15 "Fork-Oil"

@ MEXEC:

That means you can use oil from any manufacturer or supplier as lon sa the specification is FORK OIL with viscosity SAE 10 to SAE 15.
Doesn´t matter if SHELL, PENNZOIL, GULF. Everything will do the job.

[mexec]

Thanks

[eichy]

I try my best:
Its not so important from which factory the forkoil comes. More important ist, that you use a SAE10-SAE15 Oil as Hermann writes.

[mexec]

ok
are all right these ?

http://www.omf.com.tr/urungruplari/advance_fork_5.aspx

http://www.omf.com.tr/urungruplari/advance_fork_10.aspx

http://www.omf.com.tr/urungruplari/advance_fork_15.aspx

http://www.bp.com/liveassets/bp_interne ... il_tds.pdf

[alexander]

Hi Mexec,

first thre links are o.k.

Forth link I can´ t translate. Although living in "little Anatoly" here in west- Berlin I´m not able spaeking or reading one turkish word.

So take one of the first ones and remark the higher the viskositynumber the thicker the oil will be. Means the tougher the fork will be.

Try one and you will see what happens.
Be brave, don´t tarry.

Go to your lokal forkoildealer, by a pack, put it into the fork, fasten the catch.
Then ignition, kick, and rush.

Good luck

[mexec]

this in feature another which type alternative oil useable ? shell or castrol or mobil ......???

SAE 10 - SAE 15 "Fork-Oil"

I try my best:
Its not so important from which factory the forkoil comes. More important ist, that you use a SAE10-SAE15 Oil as Hermann writes.

Hi Mexec,

first thre links are o.k.

Forth link I can´ t translate. Although living in "little Anatoly" here in west- Berlin I´m not able spaeking or reading one turkish word.

So take one of the first ones and remark the higher the viskositynumber the thicker the oil will be. Means the tougher the fork will be.

Try one and you will see what happens.
Be brave, don´t tarry.

Go to your lokal forkoildealer, by a pack, put it into the fork, fasten the catch.
Then ignition, kick, and rush.

Good luck

Thanks