Seite 1 von 1

500R Center Stand on a Silver Star?

BeitragVerfasst: 25. September 2011 18:05
von Donny
Will a 500R Center stand fit a Silver Star without cutting and welding? They look the same to me. Danke all.

Bild

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 25. September 2011 18:33
von mzkay
not according to parts list

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 25. September 2011 19:30
von Donny
mzkay hat geschrieben:not according to parts list


Yes, I see the part numbers are not the same, but measurements look identical. Just curious if anyone has tried to do.

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 25. September 2011 23:01
von Maddin1
Grüße!

Das auf dem Bild oben ist auf jeden fall ein Silverstar Rahmen. Also past der Unterzug mit dem Hauptständer auch bei dir. Wie lautet denn die Rahmennummer? Wenn sie ein "RS" oder "RSX" beinhalted ist es zu 100% ein Silverstar Rahmen.

Translated with Google:

That's on top of the image in any case, a Silver Star frame. Well past the joist with the main stand also with you. How then is the frame number? If they have a "RS" or "RSX" leg halted it is 100% a Silver Star frame.

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 25. September 2011 23:41
von Donny
Maddin1 hat geschrieben:Grüße!

Das auf dem Bild oben ist auf jeden fall ein Silverstar Rahmen. Also past der Unterzug mit dem Hauptständer auch bei dir. Wie lautet denn die Rahmennummer? Wenn sie ein "RS" oder "RSX" beinhalted ist es zu 100% ein Silverstar Rahmen.

Translated with Google:

That's on top of the image in any case, a Silver Star frame. Well past the joist with the main stand also with you. How then is the frame number? If they have a "RS" or "RSX" leg halted it is 100% a Silver Star frame.


Thanks Maddin1. Here's a picture of the frame ID. It has the RSX for the Typ. This frame is from a 500R. I have measured the center stand and it appears the same as the one on my Silver Star, so I think it will work. Danke!
Bild

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 26. September 2011 00:12
von Maddin1
Das ist wirklich ein Silverstar Rahmen.

RS heißt es ist ein Silverstar mit 27PS
RSX heißt es ist eine Silverstar mit 34PS

Wenn es ein 500R Rahmen wäre, also eine "Classic", dann würde da nur MZ 500 R stehen.

Hier mal noch ein Link zu "Paule56" hier aus dem Forum, er hat eine Liste erstellt, wo alle MZ 500 Modelle aufgeschlüßelt sind, bzw wo man anhand der Nummer rausfinden kann welches Modell es ist


http://www.bowdenfix.de/rotax/Rotaxliste.htm


The Silver Star is really a frame.

RS says a Silver Star with 27HP is
RSX there is a Silver Star with 34PS is

If it was a 500R frame, ie, a "Classic", then there would only be 500 R MZ.

Here is a link to times "Paule56" here from the forum, he has created a list where all models are aufgeschlüßelt MZ 500, or where you can find out which model it uses the number is

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 26. September 2011 00:43
von Donny
Thank you very much! :bia:

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 16. Oktober 2011 12:32
von madoc
I just bought a silverstar here in the UK
Frame number has the RSX

The side stand is rubbish.

Is there anywhere I can get a centre stand or what is the closest part (from another bike) that I can grind and weld (if it isn't aluminium)

cheers

John

Re: 500R Center Stand on a Silver Star?

BeitragVerfasst: 17. Oktober 2011 19:39
von Martin H.
madoc hat geschrieben:Is there anywhere I can get a centre stand

Maybe you should ask "Ente" -> www.motorradente.de