Das MZ Forum für MZ Fahrer

Hilfe rund um die Emmen auf http://mz-forum.com

Alle Zeiten sind UTC + 1 Stunde




Ein neues Thema erstellen Auf das Thema antworten  [ 3 Beiträge ] 
Autor Nachricht
 Betreff des Beitrags: Wiring the lichtmaschinen
BeitragVerfasst: 7. November 2019 16:06 
Offline
Benutzeravatar

Beiträge: 36
Wohnort: Corby, United Kingdom
Alter: 62
Hi there everybody

I have just finished wiring my 1954 RT125/1 and I seem to have a problem!

When I switch the ignition on I have no spark to the plug and the charge light and neutral light are glowing very bright. when I turn the key to the next position I get no lights and the fuse blows. Have I wired the lichtmaschinen correctly?

Hopefully the picture will show the wiring.

Dateianhang:
IMG_7615-07-11-19-14-58.JPG



Many thanks, Neil


Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.


Nach oben
 Profil  
 
 Betreff des Beitrags: Re: Wiring the lichtmaschinen
BeitragVerfasst: 7. November 2019 16:41 
Offline
Benutzeravatar

Beiträge: 96
Alter: 74
Hallo Neil,
I have wired my RT/2 in the same way. I suppose the failure must be in the general wiring.
Check up the wiring with a measuring instrument on base of the electrical scheme.
Edgar


Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.


Nach oben
 Profil  
 
 Betreff des Beitrags: Re: Wiring the lichtmaschinen
BeitragVerfasst: 7. November 2019 17:20 
Offline
Benutzeravatar

Beiträge: 36
Wohnort: Corby, United Kingdom
Alter: 62
Hi there!

Many thanks for the quick reply!

I think I might have to look elsewhere (possibly inside the headlight?)

Kind regards, Neil


Nach oben
 Profil  
 
Ein neues Thema erstellen Auf das Thema antworten  [ 3 Beiträge ] 

Powered by phpBB © 2010 phpBB Group
Template by kutt