Foren-Übersicht
Startseite
Aktuelle Zeit: 18. August 2025 11:29

Alle Zeiten sind UTC + 1 Stunde




Ein neues Thema erstellen Auf das Thema antworten  [ 5 Beiträge ] 
Autor Nachricht
 Betreff des Beitrags: ETZ 250 verbrennt Getriebeöl
BeitragVerfasst: 9. Juli 2024 11:46 
Offline

Registriert: 9. Juli 2024 07:47
Beiträge: 1
Themen: 1
Birthday Shirt Magic: Turn Every Party Into a Cherished Memory

A Birthday Shirt can do so much more than finish an outfit. It’s a ticket to laughter, a spotlight for the birthday kid, a memory that doesn’t fade after the last candle is blown out. Just ask any family who’s ever looked through an old box of party photos. LionKingShirt has seen it happen again and again-turning an ordinary party into something no one forgets. Each one holds stories, smiles, maybe even a frosting stain or two.

1. Personalized Ideas and Special Designs

A party starts with excitement, and sometimes all it takes is the right Birthday Shirt to set the mood. Why do kids light up when they see their name on a tee? Maybe it’s pride. Maybe it’s just the thrill of seeing “Birthday Squad” in bright letters. Either way, that shirt quickly becomes the star’s badge for the day.

Bild

Custom tees fit every age for celebration fun

Find More Info: Birthday Shirts: A Stylish Way to Celebrate Your Big Day

1.1 Printing Names, Ages, and Special Messages

Think about the last time you saw a kid wearing a shirt that read, “I’m Six!” or “Level 10 Unlocked.” Did you see their face? Beaming. Personalized Birthday T Shirts with names or ages aren’t just for photos—they spark conversations. Grandma points, friends ask about it, and suddenly the shirt is as important as the cake.

  • Names front and center
  • Catchy slogans or jokes
  • Animals, cartoons, or even a hobby splashed across the chest
Sometimes, a simple “Happy Birthday, Jamie!” makes the whole day feel bigger.

1.2 Designs for Every Age and Personality

Kids change fast. One year, it’s dinosaurs. The next, it’s astronauts or soccer. Birthday Shirt designs keep up—cartoon prints for little ones, vintage band logos for teens, maybe a throwback to the ’90s for adults who want to feel like a kid again. Matching shirts for the whole family? Suddenly, everyone’s in on the fun. The camera loves it.

2. Saving Memories With Photos and Keepsakes

If there’s one thing birthdays are good for, it’s filling up the family album. But look closer—what stands out in those photos? Nine times out of ten, it’s the Birthday T Shirt, bright and bold in every shot. Some shirts survive more than a single year; others retire with honor after a day full of games and giggles.

2.1 Photos With Birthday Shirts: From Snapshots to Traditions

Family traditions have to start somewhere. Maybe it’s lining up next to the same backyard tree every year, each time in a new Birthday Shirt. Or stacking old shirts for a “shirt tower” photo—one for every age, every milestone.

  • Siblings in matching shirts
  • Best friends making goofy faces
  • Parents jumping into the frame, too
These aren’t just pictures. They’re proof: you were there, you celebrated, you laughed.

Bild

Turn heads everywhere you go in this shirt

Useful Reference: Find the Best Birthday Shirts for a Fun Celebration

2.2 Keeping Shirts as Mementos

Not all shirts end up in the wash. Some get tucked away, folded neat in a memory box, waiting for the right rainy day to come out again. Others might get turned into a quilt, stitched with love, or framed in a playroom. The point isn’t just to keep a piece of fabric. It’s to hold onto the memory—the sticky fingers, the goofy grin, the “just one more song!” at the end of the party. LionKingShirt fans often say their boxes of old shirts are the best time machines they own.

3. Creating Connection and Excitement at the Party

You can tell who’s the birthday kid from across the room, thanks to that shirt. But something else happens, too: matching shirts turn a bunch of guests into a team. “Birthday Squad” becomes more than a slogan—it’s a reason for everyone to play along.

Sometimes, even shy guests join the fun when they get to wear a theme shirt. Suddenly, the games get louder, the laughter grows, and the photos get better. Who knew a Birthday Shirt could break the ice?

4. The Meaning Behind the Shirt

A Birthday Shirt LionKingShirt is never just fabric. It’s a flag planted in the middle of childhood. Years down the line, someone opens a drawer, finds an old shirt, and is right back in the moment—blowing out candles, making a wish, smiling at family.

It’s not about fashion. It’s about remembering. The smallest details—names, colors, that chocolate stain from the cake-tell the biggest stories. With LionKingShirt, every party becomes more than just a gathering. It becomes a story worth sharing, again and again.


Fuhrpark: MZ Typ/Baujahr, MZ Typ/Baujahr, ...

Zuletzt geändert von ramiroflores am 18. August 2025 10:29, insgesamt 3-mal geändert.

Nach oben
 Profil Position des Users auf der Mitgliederkarte  
 
 Betreff des Beitrags: Re: ETZ 250 verbrennt Getriebeöl
BeitragVerfasst: 9. Juli 2024 12:10 
Offline

Registriert: 18. Januar 2022 18:52
Beiträge: 63
Themen: 5
Das kann eigentlich nur die Mitteldichtung oder die Wellendichtringe sein, sind die Dichtflächen denn schön glatt damit die Dichtungen da auch richtig arbeiten können? Kommt ja nicht selten vor, dass die Dichtflächen der Mitteldichtung (welche nur aus Dichtmittel wie: Dirko Ht, Hylomar o.ä. besteht) durch Schraubendreher verhunzt wurden während dem trennen (vorallem wenn die Dichtung noch aus dem Bärendreck besteht)

MZ Motoren haben grundsätzlich keine Mitteldichtung, durch das hinzufügen von einer verändert sich das Axialspiel der Wellen was sich dann nichtmehr richtig ausgleichen lässt!!

Einzig andere Erklärung wäre das du einen Riss im Motorgehäuse hast, wo das Getriebeöl durchgedrungen ist… halte ich aber für unwahrscheinlich das hättest du bestimmt bemerkt beim Neuaufbau

Verzogenes Gehäuse ist auch eine Möglichkeit fällt augenscheinlich kaum auf…


Fuhrpark: MZ Es 150/1 (125ccm), MZ Ts 125, Simson Schwalbe Kr51/1, Simson Schwalbe Kr51/1k, Simson Star Sr4-2/1

Zuletzt geändert von Moblin am 9. Juli 2024 12:49, insgesamt 4-mal geändert.

Nach oben
 Profil Position des Users auf der Mitgliederkarte  
 
 Betreff des Beitrags: Re: ETZ 250 verbrennt Getriebeöl
BeitragVerfasst: 9. Juli 2024 12:14 
Offline
Benutzeravatar

Registriert: 22. Februar 2006 20:27
Beiträge: 550
Themen: 13
Wohnort: Milower Land OT Milow
Alter: 56
Das ist ja ein halber Liter auf 200Km. Mehr Kann ich dazu nicht schreiben , mir fehlen die Worte . Schon der Hinweis auf eine Mitteldichtung :shock:
MFG Dirk


Fuhrpark: MZ TS 250/1

Nach oben
 Profil Position des Users auf der Mitgliederkarte  
 
 Betreff des Beitrags: Re: ETZ 250 verbrennt Getriebeöl
BeitragVerfasst: 9. Juli 2024 12:43 
Offline
Benutzeravatar

Registriert: 17. Februar 2019 00:04
Beiträge: 411
Themen: 22
Hallo

Also eine Entlüftungsschraube hat die ETZ nicht oder Du meinst den Einfüllpropfen, der als Entlüftung dient.
Auch die Mitteldichtung gibt es nicht vom Werk aus. Immer ohne montieren, sonst kann es Probleme mit dem Getriebe geben!
Wenn dort wirklich soviel Getriebeöl durchgeht, muss das auch an der Kerze sichtbar sein und vorallem auch an der Abgasfahne. Ist hier etwas feststellbar?
Wenn soviel Öl verbrannt wird, geht auch Luft- Benzingemisch ins Getriebeöl. Das kann man riechen und sehen.
Wie sieht es denn damit aus?
Wie sieht es den mit der Inkontinenz der guten aus?
Vielleicht wird es gar nicht verbrannt, sondern suppt nur an den Dichtungen.

Wenn doch soviel im Brennraum verschwindet, stimmt etwas mit den Wellendichtringen der Kurbelwelle nicht (evtl. Montagefehler).

Grüße


Fuhrpark: MZ ETZ 250/300 - 1981, 30PS / 36,8Nm
MZ ETZ 500 Twin - 1987/2024
Simson KR51 / 1980, original

Nach oben
 Profil Position des Users auf der Mitgliederkarte  
 
 Betreff des Beitrags: Re: ETZ 250 verbrennt Getriebeöl
BeitragVerfasst: 9. Juli 2024 16:00 
Offline

Registriert: 17. Januar 2009 09:53
Beiträge: 7871
Themen: 38
Bilder: 83
Wohnort: Regensburg
es gibt eine Gehäusevariante der Getrenntschmierung, welche einen Ölkanal hat, welcher im Bereich der Kupplungsdeckeldichtung mittig oben endet. Wenn man jetzt einen normalen Kupplungsdeckel verbaut, bleibt dieser Kanal offen und zieht Getriebeöl.
Sofern du sowieso Gemisch tankst, Kupplungsdeckel demontieren, Kanal verschließen, fertig.

schau mal hier:
viewtopic.php?f=4&t=90524&p=1926326&hilit=%C3%96lkanal+Getrenntschmierung#p1926573
und hier:
viewtopic.php?f=4&t=10758


Fuhrpark: son paar MZ

Nach oben
 Profil Position des Users auf der Mitgliederkarte Persönliches Album  
 
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen Auf das Thema antworten  [ 5 Beiträge ] 

Alle Zeiten sind UTC + 1 Stunde


Wer ist online?

Mitglieder in diesem Forum: Björn-MV, ETZ250Greiz, RenéBAR und 348 Gäste


Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.

Suche nach:
Impressum

Powered by phpBB® Forum Software © phpBB Group
Deutsche Übersetzung durch phpBB.de