Foren-Übersicht
Startseite
Aktuelle Zeit: 25. August 2025 17:37

Alle Zeiten sind UTC + 1 Stunde




Ein neues Thema erstellen Auf das Thema antworten  [ 6 Beiträge ] 
Autor Nachricht
BeitragVerfasst: 6. Juni 2009 16:38 
Offline

Registriert: 9. April 2009 17:53
Beiträge: 68
Themen: 8
Bilder: 3
Wohnort: Finland
Alter: 51
Hello!
Does anyone know if there is replacement part for the "Entlüftungsschraube". Mine is totally stuck and before trying to take it off I'd like to have a sparepart. Is the Bremssattel made by Brembro or is it an MZ fabricated thing?
I know they are sold in Germany for a couple of euros but the postage to Finland seems to be always almost 20 € and that is ridiculous.
It is quite impossible to get air out of the system as I changed the HBZ to Grimeca.
Thank you.


Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.


Fuhrpark: MZ ETZ 251 1990

Nach oben
 Profil Persönliches Album  
 
BeitragVerfasst: 6. Juni 2009 17:33 
Offline
Benutzeravatar

Registriert: 7. April 2009 08:42
Beiträge: 4074
Themen: 90
Bilder: 79
Wohnort: bei Erfurt
Alter: 46
Well, the "Bremssattel" is an original MZ. Can't understand why the postage should be so expensive.
Give me your adress, i'll send you the "Entlüftungsschraube".

_________________
Wenn alle Stricke reissen, ist der Strick nicht dick genug.
XJ 600s Diversion - nix für Weicheier
Hin und wieder muss man dem Schicksal ein Angebot machen...
Mirinda 4 sale


Fuhrpark: "Candy": MZ ETZ 125/150 Baujahr 1990 - verkauft
"Camilla": MZ TS 250/1 Baujahr 1980 mit SE Baujahr 1967 - verkauft
ohne Namen: MZ TS 150 Baujahr kA steht im den Papieren und die liegen in der Garage - verkauft
"Christel von der Post": MZ ES 150/1 Baujahr 1975 - verkauft
"Teilehaufen": MZ ES 250/2 Baujahr 1968 - verkauft
"Mirinda" ES/2 Gespann mit Superelastik Bj. 1969 zu verkaufen
"Eierknacker" Yamaha XJ 600 S Diva Bj. 1999

Nach oben
 Profil Position des Users auf der Mitgliederkarte Persönliches Album  
 
BeitragVerfasst: 6. Juni 2009 17:49 
Offline
Benutzeravatar
------ Titel -------
Zeltphilosoph

Registriert: 18. Februar 2006 14:26
Beiträge: 5700
Themen: 72
Bilder: 3
Teemu hat geschrieben:
Hello!
.. Is the Bremssattel made by Brembro or is it an MZ fabricated thing? ...


It has been manufactured by MZ, but under license from BREMBO.
Identic components should be founf in BMW R80, R45, some GUZZIs.

(next weekend MZ- meeting in MULTIA!)

_________________
Gruesse vonne Parkbank
Alexander

K3 ………...Bild


Fuhrpark: Suzuki RV125 VanVan 2003, K3.

Nach oben
 Profil Position des Users auf der Mitgliederkarte Persönliches Album  
 
BeitragVerfasst: 7. Juni 2009 19:39 
Offline

Registriert: 9. April 2009 17:53
Beiträge: 68
Themen: 8
Bilder: 3
Wohnort: Finland
Alter: 51
Thank you for the info. I hope to get to Multia to the MZ-meeting if my bike stays in one piece.


Fuhrpark: MZ ETZ 251 1990

Nach oben
 Profil Persönliches Album  
 
BeitragVerfasst: 7. Juni 2009 20:32 
Offline

Registriert: 20. September 2007 11:02
Beiträge: 855
Themen: 8
Wohnort: Jena
Alter: 48
Hey Teemu,

The MZ repair manual says, the air is comming out by itself, if you do the following:

- Park the bike on its Mainstand.
- Move the handle bar to the left
- Open the cap on the brake fluid reservoir
- Wait for about 1 hour and knock on the calliper , brake tube and HBZ from time to time (helps the air bubbles climbimg)

that's it!

The idea on this method is, that the calliper is constructed and mounted in a way that all air bubbles (where ever they hide) can climb upwards to the HBZ. For me, this method worked fine when I changed the fluid. But I'm not really shure, if it makes a difference with the Grimeca HBZ. You might try, if you want.

_________________
Für den Erhalt der elektromechanischen Corned-Beef-Dosen-Regler !


Fuhrpark: '89er ETZ 251 (fast) Originalzustand

Nach oben
 Profil Position des Users auf der Mitgliederkarte  
 
BeitragVerfasst: 8. Juni 2009 17:36 
Offline

Registriert: 9. April 2009 17:53
Beiträge: 68
Themen: 8
Bilder: 3
Wohnort: Finland
Alter: 51
torbiaz hat geschrieben:
Hey Teemu,

The MZ repair manual says, the air is comming out by itself, if you do the following:

- Park the bike on its Mainstand.
- Move the handle bar to the left
- Open the cap on the brake fluid reservoir
- Wait for about 1 hour and knock on the calliper , brake tube and HBZ from time to time (helps the air bubbles climbimg)

that's it!

The idea on this method is, that the calliper is constructed and mounted in a way that all air bubbles (where ever they hide) can climb upwards to the HBZ. For me, this method worked fine when I changed the fluid. But I'm not really shure, if it makes a difference with the Grimeca HBZ. You might try, if you want.



Hello,

That might be worth a try. I must try it tomorrow, I can leave the bike alone for eight hours so maybe most of the air comes out.
Teemu


Fuhrpark: MZ ETZ 251 1990

Nach oben
 Profil Persönliches Album  
 
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen Auf das Thema antworten  [ 6 Beiträge ] 

Alle Zeiten sind UTC + 1 Stunde


Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 7 Gäste


Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.
Du darfst keine Dateianhänge in diesem Forum erstellen.

Suche nach:
Impressum

Powered by phpBB® Forum Software © phpBB Group
Deutsche Übersetzung durch phpBB.de